1 9

VTSYIQI Digital Fruit Penetrometer Sclerometer Farm Fruit Hardness Tester with Range 0.4 to 30kgf/cm2 Diameter 7.9mm

VTSYIQI Digital Fruit Penetrometer Sclerometer Farm Fruit Hardness Tester with Range 0.4 to 30kgf/cm2 Diameter 7.9mm

$155.00 USD
$155.00 USD
Sale Sold out
Shipping calculated at checkout.

  • Product Description

  • Measurement Range: 0.4～30kgf/cm2 (×105 Pa)
  • Load scale value: 0.01kgf/cm2
  • Precision:±1%
  • Pressure needle diameter: Ø7.9mm
  • Depth of pressure needle: 10mm

Product Description

 

The Digital Fruit Sclerometer has advantages of high precision,easy operation and carry.It can test fruit like watermelon. (PS:Scientific use of the measurement range is 10%-100% of full range,suggest measurement department do not to test below 1% of full range.)

Characteristics:

1.Standard fruit hardness unit display:kgf/cm2

2.The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.It adopt the 3.7V lithium battery and auto shut off if no operation in 10 minutes.

3.Two test mode:Peak hold and Real-time;

Technical Specifications

* Measurement Range: 0.4～30kgf/cm2 (×105 Pa)

* Load scale value: 0.01kgf/cm2

* Precision:±1%

* Pressure needle diameter: Ø7.9mm

* Depth of pressure needle: 10mm

* Power: 3.7V lithium battery

* Charging time: 4~6 hours

* Continuous usage time of battery:About 10 hours

* Battery life: ≥300times

* Charger: Inpu: AC 220V 50/60HZ; Output: DC 5V 1000mA

* Stability: Temperature drift: 0.2uV/℃（0-60℃）

* Zero temperature drift: ≤ 0.1%/8 hour/FS

* Work temperature: 5℃～35℃

* Transport temperature: 0℃～60℃

* Relative humidity: 15％～80％RH

* Work conditions: No focus ,Non-corrosive in surroundings

* Net weight: About 260g

* Size:160mm×71mm×35mm

Four,Button function

OFF/ON--- (start up ,shut down key):When press this key,turn on the power,appear measuring interface.Press this key again can shut down gauge.

ZERO---(zero key):The testing value on the screen can be zero when click this key.

SET---(switch mode key):When press this key,enter the ”Peak” mode.Press “SET“key for 4-5 seconds after starting up,and then loosen,can enter into the setting interface.

UNIT---(unit key)Press “UNIT“key for 4-5 seconds,the digital value inverted display.

Model: Digital Display Push-pull Force Meter

Maximum load value: 500N; 50kg; 110Lb; 1800Oz

Load division value:0.1N; 0.01kg; 0.01Lb; 1Oz

Sensor structure: Inner sensor

Accuracy: ±1％

View full details