VTSYIQI Elevator Cable Tensionmeter Gauge Tester Cable Tension Meter with Max Load Range 5000N Resolution 1N 3 Units Conversion N/Kg/Lb 6-bit Large Screen Display High Precision for the Tension Test of Elevator Traction Wire Rope

VTSYIQI Elevator Cable Tensionmeter Gauge Tester Cable Tension Meter with Max Load Range 5000N Resolution 1N 3 Units Conversion N/Kg/Lb 6-bit Large Screen Display High Precision for the Tension Test of Elevator Traction Wire Rope

Discription:

The Elevator rope tensiometer is main used in the elevator traction wire rope tension test.

In elevator installation, acceptance and inspection process, through the test and adjustment of each tractive ropes, make each rope tension as consistent as possible. So can prolong the service life of tractive sheave and make the elevator wire rope run more smoothly.

The tensiometer can also be used in bridge sling, tower connection line, overhead conductors, index wire rope and all involving the wire tension tests.

Characteristic:

1. Has the tensile force rope structure, no need to disassemble, install and making test within a few seconds

2. Can measure the relatively static tension of wire rope(Rope No:1 Diameter:φ 10 Rope No:2 Diameter:φ 13 Rope No:3 Diameter:φ 16 )

3. Support each wire rope multipoint testing, greatly improve the test accuracy

4. Can transmit the test data to the computer via USB, manage the testing data

Features:

1. High precision and high resolution, 6-bit large screen display;

2. Three display modes are available-to maximize the test efficiency;

3. N (Newton), kg (Kilogram), lb (Pound) three measurement units are available for selection and conversion;

4. Peak hold function. Keep peak display until manually cleared;

5. Automatic peak function, keep displaying the peak value and automatically release after 3 seconds;

7. The upper and lower limits and comparison values ​​can be set for statistical analysis. Buzzer alarm when the comparison value is exceeded;

8. Data storage function, can store 896 test values;

9. Data output function, the data can be input into the computer through the data line for various analysis;

10. Green and environmental protection, automatic shutdown after 50 minutes of no operation.

11. High-quality charging power supply. The charging voltage is available from 100V to 240V, which can be adapted to most areas at home and abroad. There are short circuit, leakage, overload protection functions;

Technical parameters:

Max Load Range:5000N

Rope No:1 Diameter:φ 10

Rope No:2 Diameter:φ 13

Rope No:3 Diameter:φ 16

Resolution:1N

Accuracy:less than ±5%

Repeatability:less than ±1%

Measuring Range:10% to 90%

Loading method:Manual

Power:7.2V Nickelmetal hydride rechargeable battery pack

Size:Bearing body: 418 × 128 × 40mm Host machine: 230 × 66 × 36mm