VTSYIQI Test Stand for SRT-6200 SRT-6210 SRT-6200S SRT-6210S SRT-6210CT Surface Roughness Meter

• Product Description

• SRS-1 Measurement Stand, primarily for use with measuring instruments, according to the different shape and height of the workpiece, the instrument can not be measured directly to get accurate data, it needs to be mounted on the measurement stand, and then turn high, low to let the pointer in the zero scale, thus greatly to improve the accuracy of measurement.
• Dimensions 154x240x467mm Distance 150 mm Rated Load 500N
• Installation Procedure: Unloading the screws in adjustment bracket with a screwdriver, remove the adjustment bracket, mounted the instrument on the measurement stand(use two previously removed screws). Operation Procedure: Press the power button to boot, by adjusting the measuring bracket so that the sensor contact with the measured object, the stylus cursor position (refer to manual component description) should be instructed in "0" point (or upper and lower frame) position. After adjustment, t
• * Instrumentation and measurement stand should be fixed, to prevent loosening,shaking, cause measurement error. * After adjustment, the measurement can be taken when the instrument is stable in 2 seconds, ensure the accuracy of measurement. (the stylus will shake when adjusting position) * When measuring curved surface, should try to make the measurement distance as short as possible,suggestion sampling length at 0.25mm.
• SRS-1 Measurement Stand, primarily for use with measuring instruments, according to the different shape and height of the workpiece, the instrument can not be measured directly to get accurate data.

Product Description