Skip to product information
1 of 8

VTSYIQI

VTSYIQI Ultrasonic Hardness Tester Meter Gauge Ultrasonic Durometer Sclerometer with Force 10N 1kgf Probe Range HV 10-1900 HB 76-618 HRB 41-105 HRC 20.3-68 for Lon Nitriding Layer of Stamping Dies

VTSYIQI Ultrasonic Hardness Tester Meter Gauge Ultrasonic Durometer Sclerometer with Force 10N 1kgf Probe Range HV 10-1900 HB 76-618 HRB 41-105 HRC 20.3-68 for Lon Nitriding Layer of Stamping Dies

Regular price $2,380.00 USD
Regular price Sale price $2,380.00 USD
Sale Sold out
Shipping calculated at checkout.

VTSYIQI Ultrasonic Hardness Tester Meter Gauge Ultrasonic Durometer Sclerometer with Force 10N 1kgf Probe Range HV 10-1900 HB 76-618 HRB 41-105 HRC 20.3-68 for Lon Nitriding Layer of Stamping Dies

About this item

The ultrasonic hardness tester is using ultrasonic contact impedance method to compare and test patterns, this is an innovative design, of auto-calibration of probe, presents advantages of high precision, fast speed, easy operation, etc. The hardness measurement covers most ferrous metals, non-ferrous metals and for their alloys in industrial production.

It is applicable in hardness test of flange edges, root of gear groove, stamping parts, thin plates, for surface-hardened gear grooves and it's taper parts, as well as shafts, thin-walled pipes, turbines.etc.

Accord to the Standard GB/T 34205-2017, DIN50159-1 and ASTM -A1038

For materials with different elastic modulus. multi-point calibration function

Support hot-swap and self calibration: automatically + by manual identifies the probe

The material function include 3 new material settings to facilitate hardness testing of special materials

3.5-inch IPS (In-Plane Switching) full digital LCD display with wide viewing angle, and the back light can be adjusted arbitrarily. Display resolution 480×320.

USB communication interface allows for data exchange with PC and settings on PC. 600 sets of hardness measurement data each includes measurement date, sensor type, material, number of times, single measurement value, average value, maximum value, minimum value, hardness scale and other information

The upper and lower limits of the hardness value can be pre-set, and an automatic alarm will be issued if the range is exceeded, which is convenient for users to meet the needs of batch testing

Description

The ultrasonic hardness tester is using ultrasonic contact impedance method to compare and test patterns, this is an innovative design, of auto-calibration of probe, presents advantages of high precision, fast speed, easy operation, etc. The hardness measurement covers most ferrous metals, non-ferrous metals and for their alloys in industrial production. It is applicable in hardness test of flange edges, root of gear groove, stamping parts, thin plates, for surface-hardened gear grooves and it's taper parts, as well as shafts, thin-walled pipes, turbines.etc.

Features

Measurementdirection perpendiculartotestingsurface

Hardnessscale HV10-1900,HB76-618,HRB41-105,HRC20.3-68,HRA60.7-85.6

TestError HRC:±2HRC;HB:±3%HB;HV:±4%HV,pleaserefertothetablebelow

DisplayMeasurement Vickers(HV)+selectedhardnessscale

Measuringmaterials steelandcaststeel,castaluminumalloy,purecopper

Proberecognition automaticrecognition+manualsetting,supportshotswapping

Datastorage maximum600measurement

Workingvoltage 3.7Vlithium-ionbatterypack

Continuousworkingtime about10hours

Chargingpowersupply 5V/1000mA;

Communicationinterface USB2.0

test forceofProbe 2kgf

View full details

Video