1 9

VTSYIQI

VTSYIQI AW Water Activity Meter Analyzer Monitor Portable Water Activity Meter with Resolution ±0.01AW Temp 0~50°C Humidity <95% Accuracy 0.02AW Range 0 to 1.0AW LCD Digital Display for Grain Fruits Vegetables

VTSYIQI AW Water Activity Meter Analyzer Monitor Portable Water Activity Meter with Resolution ±0.01AW Temp 0~50°C Humidity <95% Accuracy 0.02AW Range 0 to 1.0AW LCD Digital Display for Grain Fruits Vegetables

$586.00 USD
$586.00 USD
销售额 售罄
结账时计算的运费。

VTSYIQI AW Water Activity Meter Analyzer Monitor Portable Water Activity Meter with Resolution ±0.01AW Temp 0~50°C Humidity <95% Accuracy 0.02AW  Range 0 to 1.0AW LCD Digital Display for Grain Fruits Vegetables

Feature:

Product Description-----The activity meter can measure bread, biscuits, cakes, puffed foods, snack foods, dehydrated foods, dried fruits, meat clams, preserved fruits, etc. It mainly reflects the amount of free water in the state of food balance, the stability of food and the possibility of microbial reproduction, and the chemical, enzyme and physical changes that can cause the change of food quality. It is often used to measure the dryness enduring ability of the microorganisms .

Technical Parameters-----Display: 6 bit backlight LCD digital display, 3 bit humidity aw, 3 bit temperature display Range: 0~1.0aw Resolution: ±0.01aw Accuracy: ±0.02aw: Non conductive humidity Sampling Time: 5 Minutes Operating condition: Temp: 0~50°C (32~122°F) Humidity: <95%RH Power supply: 2x1.5V AAA Um-4 Battery Size: 135x70x44mm Weight: 100g (Not including batteries) Standard Accessories * Main Unit * Sample Plate * Carrying Case * Operation Manual .

Measuring Procedure------4.1 Press the power key to switch on the power and the gauge enters the auto mode which can automatically test the water activity. 4.2 Put the samples into the sample plate, and then cover the of the gauge onto the sample plate. Lay aside for about 5 minutes, when the reading gets stable, the water activity can be obtained. 4.3 After testing, press and hold the power key for about 3 seconds to turn off the gauge. Clean the sample plate for next use .

READING CORRECTION------When it is necessary to correct the reading value, press and hold the Power Key for about 7 seconds. Then release the key when the signal ‘Cor’, comes out on the display. There will be a decimal number with two places, which is the correction value. Then open the battery cover on the back, there are 2 small hole below the battery slot. Use a small hard bar (such as screwdriver) to slightly touch the key inside, the correction value will be increased or decreased .

Product Feature-----The VTS-160A can be used to measure the water activity of foods. No matter when and where you need to measure water activity, VTS-160A water activity meter is your unique choice. This is a real portable water activity meter, with a weight of only 100 grams, lighter than a mobile phone, and a precision of 0.02 aw, easy to measure water activity anytime and anywhere .

You can check our professional calibration video at the following Related Video Shorts

The machine can be calibrated at 2 points. The bottom of the battery is 2 points calibrated under the battery.

After the order , Kindly please answer us the following question . It is worth noting that the measured object cannot be HEATED.

1 What substance do you need to test and what accuracy do you need? We would like to confirm whether the Water Activity Meter you bought meets your requirements.

2 This instrument Resolution is ±0.01aw, Accuracy: ±0.02aw, does these conform your need? please confirm.

3 Sampling Time :

(1) 0.30aw-0.80aw: need to measure 5 minutes;

(2) 0.1aw-0.3aw, 0.8aw-0.95aw: need to measure 20 minutes;

(3) 0-0.1aw , 0.95aw-1aw: need to measure 24 hours.

You can check our professional calibration video at the following Related Video Shorts

The machine can be calibrated at 2 points. The bottom of the battery is 2 points calibrated under the battery.

Product Parameters:

Display :6 bit backlight LCD digital display, 3 bit humidity aw, 3 bit temperature display

Range:0~1.0aw

Resolution:±0.01aw

Accuracy:±0.02aw

Sampling Time : Fast test, The test time of our activity meter is greater than 0.25 and less than 0.85, generally 10 minutes to 20 minutes, less than 0.25 greater than 0.85, the minimum test time is 30 minutes to 1 hour

Operating Condition:Temp: 0~50°C,Humidity: <95%

Power Supply:2x1.5vAAA Um-4 Battery(battery not included)

Size:135x70x44mm

Weight:100g (Not including batteries)

Standard Accessories:Main Unit ( 1pc ),Carrying Case ( 1pc ),Operation Manual ( 1pc )

Product Description:

The Water Activity Meter mainly reflects the amount of free water in the state of food balance, the stability of food and the possibility of microbial reproduction, and the chemical, enzyme and physical changes that can cause the change of food quality. It is often used to measure the dryness enduring ability of the microorganisms. By measuring the water activity of food and selecting reasonable packing and storage methods, the use of preservatives can be reduced and the shelf life of food, grain and fruits and vegetables can be judged.

The machine can be used to measure the water activity of foods. No matter when and where you need to measure water activity, water activity meter is your unique choice. This is a real portable water activity meter, with a weight of only 100 grams, lighter than a mobile phone, and a precision of 0.02 aw, easy to measure water activity anytime and anywhere.

Product Feature:

Fast test, The test time of our activity meter is greater than 0.25 and less than 0.85, generally 10 minutes to 20 minutes, less than 0.25 greater than 0.85, the minimum test time is 30 minutes to 1 hour

Easy reading, water activity and temperature of the samples displayed together.

It has automatic shutdown, manual shutdown function and undervoltage alarm indication function.

Can this item be used to test non-dry food items, like jam or paste?---Yes it can.

What is the method used to determine Aw?---It tests the AW value by the meter on the bottom part. It works by placing a sample in a sealed measuring container. When the vapor pressure of the water in the substance and the water in the air reaches equilibrium, the relative humidity of the air surrounding the sample is equal to the water activity of the sample. The principle is film capacitor method

Can it be calibrated by myself? How to calibrate?---Yes you can calibrate yourself. Please kindly read the manual with Reading Correction part.

How do you calibrate this instrument?---You can calibrate yourself. Please kindly read the manual with Reading Correction part.

查看完整详细信息

Video