VTSYIQI Digital Push Pull Force Gauge Dynamometer Thrust Meter for Push Force and Pull Force Test with Precision ±0.5 Percent Capacity 100N 10kg 22 lbs

Feature
Max Load:100N
1.Peak mode: After turn on,enter into the measuring interface,click “SET” button can enter into the peak mode directly,record the Max. force value during measuring.
Warranty: 1 year
2.Push pull force shows:do not move the gauge,the above arrow shows the pull force,the below arrow shows the push force.
3.Three units:N(newton),kg(kilogram),lb(pound) display respectively ,press “UNIT” button to switch .

Feature
This product SF Push-pull Dynamometer is a simple push pull force gauge with high performance.

Specification
1.Digital display,easy reading;
2.In light weight,small size,easy to carry;
3.Unit display:Lb,Kg,N
4.The battery has over-load protection in case of short circuit and leakage of electricity .It also can tell you when the battery is running low.It adopt the 3.7V lithium battery and auto shut off with no operation in 10 minutes at the same time.

Main technical parameters
The max. Load value:100N 10kg 22Lb
Load Value:0.1N 0.01KG 0.01Lb
The sensor:Sensor inside
Precision:±0.5%
Power:3.7V lithium battery
Charging time:4~6 hours
Continuous usage time of battery:About 15 hours
Battery life:≥ 300 times
Charger :Input：AC100- 240V 50-60Hz Output： DC 5V 1000mA
Working temperature:5 ℃ ~35 ℃
Transportation temperature:-10 ℃~60℃
Relative humidity:15%~80%RH
Work environment:No focus ,Non-corrosive in surroundings